





4Ever Products Vinyl Standard Frame vinyl standard frame
Vinyl Standard Frame
Product Description
The Vinyl Standard Frame is architecturally pleasing and durable. There are several decorative cap options to change the design and look of the frame. We fabricate each sign frame to your specifications. It will stand the test of time.
Inclusions
- Your choice of cap style
- Two 4” square posts that are up to 14’ in length (available in white or khaki)
- Top T-rail
- Bottom rail
- All necessary hardware
Routing
Our vinyl frames can be routed for 3MM (1/8IN), 6MM (1/4IN), 12MM (1/2IN), or 18MM (3/4IN) substrate thicknesses.
Panel Size and Visible Area
These frames are priced by panel size. The panel size and the visual space are NOT the same.
The visual space can be calculated by subtracting 1.75” for the top T-rail, 1.25” for the bottom rail, and 2” for each side that slides into the post. This means that you lose 3” total from your height and 4” total from your width.
Please contact a representative for assistance or if you require more precise sizing options.
Note: Direct burial of any vinyl frame using posts longer than 8’ is NOT recommended. For posts longer than 8’, we recommend using either a set of 4" x 4" aluminum post extensions or a wooden 4”x4” post with a 48” length, buried 2’ into the ground.
Looking for 10' Posts with Ground Shipping Instead of Freight? Select the 10' (8' Post + 2' Post Extensions) from the post length options. Our 4" x 4" aluminum post extensions are compatible with 4" square vinyl posts. They allow for the vinyl posts to stand 8' above the ground by installing 2' into the ground (with cement) and 2' into the post. This item is sold as a set of 2.
*Substrate Not Included*
*The lowest price range listed above applies to bulk orders of 10 or more.*
Color
CAP Style
POST
DECORATIVE BASE
Substrate Height
Substrate Width
Substrate Thickness
Stakes
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.